The shielded room plays a very important role in many important occasions. To ensure the normal realization of the shielding function, the shielded room should pay attention to the following matters during the operation:
1. The power supply of the filter must not be connected to a leakage protector, but it can be connected to a load MCB; if there is a problem with the filter, the current should be cut off before the tip is discharged before repair or replacement.
2. After the cargo is shipped and used, it is strictly forbidden to suffer a huge impact or make holes in the shielding body.
3. It is strictly forbidden to penetrate non-metallic wires or ballistics into the hole of the shielded wave drain pipe.
4. Pay attention to keeping the knife edge and notch of the screen door clean to ensure the excellent performance of the screened computer room.
5. Maintenance and cleaning method: use moisture-proof material to wrap the deoxygenated bandage on the position of the reed and use anhydrous petroleum to moisten it and pull out the notch one-way to wipe it.
6. In order to ensure the sensitivity of the opening and closing of the internal transmission elements of the screen door, lightening and sliding should be carried out from time to time.
7. If you find a reed, you should loosen the reed pressing screw in time, store the broken reed, and replace it with a new one.